Upgrade the Ethernet SOUND4 IP firmware to the latest version
Ethernet - SOUND4 IP upgrades (PCI Express cards)
You may not need to download this upgrade if you've recently installed the latest Universal All Product Instaler. The most recent upgrade files are automatically stored on your computer in C:\Program Files (x86)\SOUND4\Remote Control\Upgrades.
To upgrade your processor's Ethernet - LAN Audio - AES67 & Livewire, follow these steps:
- Download the release or preview version.
- Launch the Remote Control Software and log in.
- Open "Setup" and select "Upgrade / Licenses."
- Click the "Upgrade Ethernet" button.
- Select the upgrade file you've downloaded.
Release version v2.2.5 - 2021-08-06:
Preview version v2.2.6 - 2024-09-24:
Ethernet - SOUND4 IP firmware versions
Ethernet - SOUND4 IP firmware changelog
2.2
Support Authentication mode for single-side fixed IP (only 1 side needs a fixed IP)
2.2.6
(Preview - 2024-09-24)
- For Accept Auth mode, reply to the source MAC instead of using route.
2.2.5
(2021-08-06)
- Properly show error in link when other side fails to connect because it does not receive anything.
2.2.4
(2021-02-23)
- Turn off Ethernet LED when no cable is plugged
2.2.3
(2020-02-25)
- Label compatible with ECO
- Change check links in error without using huge memory
2.2.2
(2019-07-23)
- Correct GPIO spurious activity
2.2.1
(2018-12-19)
- Correct GPIO show/display. Enabled for 2nd Enc/Dec
2.2.0
(2018-11-15)
- Support Authentication mode for single-side fixed IP
2.1
Support for second IP configuration on the same Ethernet for dual network sharing same physical Ethernet.
2.1.5
(2018-11-15)
- Correct boot problem present since 2.1.2
- Correct possible conflict on flash with FPGA on bug.
2.1.4
(2018-10-01)
- Supports GPIO (Need driver Linux:2.12/Windows:*not avail*) Need Board 1.4.13+
BUG: boot problem, DSP might not boot each time, so long reboots...
2.1.3
- Longer hostname
2.1.2
- Started on GPIO
2.1.1
- Better handling second IP/conflicts.
- More info on error/public IP.
2.1.0
- Better error logging.
BUG ? Changing Main IP may break the 2nd IP, only if one same subnet. Need change 2nd IP and put back.
2.0
Compatible with new GUI (Need Server/Remote 4.0.0)
2.0.6
- Automatic NAT Traversal. No more Recover Mode.
- Should resolve all problem of failing reconnects.
- It is recommended to update both sides, but should be compatible.
2.0.5
- Added Secondary IP. Can be used for dual network.
2.0.4
- Removed all line TTL checks
2.0.3
- Do not change settings on licence lost
- Give license fail another chance
2.0.2
- Setup Recover mode.
2.0.1
- Corrected possible drops (specially with Linear Codec)
2.0.0
- Compatible with new GUI (Need Server/Remote 4.0.0)
BUG: drops on Linear (since when ?)