Ethernet - LAN Audio - AES67 & Livewire firmware upgrades (PCI Express cards)

2.0

2.0.35

• Advertising : Correct Livewire sending unstable information, Logs improvements

2.0.34

• Advertising : Can choose to automatically disable unused advertisement

• Advertising : better automatic memory limitation

2.0.33

• Advertising : limit stored sessions to ~4000 to avoid out of memory

• More aggressive input filter of multicast packets to avoid drops due to unwanted packets

2.0.32

• Correct multicast failure break initialization (Livewire No clock received) [BUG in 2.0.30 and 2.0.31]

2.0.31

• Protect booting with slow switches (Cisco) which results in "Nothing received".
⚠️
BUG: When multiple inputs are on the same channel at boot, the Livewire clock is not received.

2.0.30

• Protect some unlikely errors, for fixing startup nonworking streams
⚠️
BUG: When multiple inputs are on the same channel at boot, the Livewire clock is not received.

2.0.29

• Fix PTP timestamp race condition, which can lead to reboot when traffic is too heavy

2.0.28

• Can specify PTP Announce/Request Interval and Timeout

• Support IGMP v3 (Experimental)

2.0.27

• Revert the GPIO logic level for Livewire. For Axia, a Low level is active (and not high)

2.0.26

• Corrected: AES67 Slave clock does not switch from a Master to another

2.0.25

• Corrected: Default broadcast is not applied

• Correct scale so upgrading from old version does not remove AES67 input settings.

2.0.24

• Corrected handling of 1-channel stream (copy left channel to right)

• Better PTP timestamping (rx timestamp pool empty)

2.0.23

• Corrections for Dante compatibility (constant o= in SDP for reconnexion after reboot ; accept numbers in Session name)

2.0.21

• Avoid to save volatile data in flash

• Other minor changes

2.0.20

• Change DSP for Dante compatibility.

• Corrected SAP session name check

• Corrected Livewire GPO snake reconnect

2.0.19

• Corrected mDNS and SAP advertising

• Corrected PTP internal sync

• Corrections for GPIO display in data description

• (cards) NEEDS Board 1.4.11

2.0.18

• Manage Livewire GPIO.

2.0.17

• SAP advertising

• Unicode corrections

2.0.16

• Reduce log

2.0.15

• Correct internal sync when Livewire master

• Show error when LANAUDIO Hostname is in conflict

• Force IGMP v2 for Cisco Catalyst

• Hostname 63 characters

• DNS-SD reply correction

• Don't allow Master when IP is not set

• Status bar should not show errors on channels out of license

2.0.14

• License management correction for sharing stream (On Both L/R, Separated L/R)

2.0.13

• Realtime optimization

• Faster recovery after Ethernet replug

• Can now use ISO chars for Channel names

2.0.12

• Can deactivate MDNS advertising

2.0.10

• Improved Multicast management and packet drops (Debug version without mdnsd, rtsp and ptpmng)

• Increased watchdog timeout to 5s

2.0.8

• Corrected sync regul to be stable when sync packet is late or sync is lost

• Corrected memory leak

2.0.7

• Memory use optimization

• Potential race condition corrected

• Better Multicast packet management

2.0.6

• Livewire Live Audio: buffer size works

• Correct synchro loss on packet reordered

• NOTE: previous setting was doing nothing in real

2.0.5

• AES67: when adress is IP, can select format (so works with raw streams)

• NOTE: new internal browser

2.0.4

• Correct Livewire protocol extra double-quote after LABL

2.0.3

• Correct Livewire Payload (value can be incompatible with some Livewire parts).

• Was using the AES67 Custom Format to choose Payload number.

2.0.2

• Correct internal memory leaks.

• Advertising (SpiSkt) more robust.

2.0.1

• Compatible with new GUI (Need Server/Remote 4.0.0)